I-SS Cable Gland
Intshayelelo ye-SSICable Gland
Amadlala ekhebhula asetyenziswa ikakhulu ukubopha, ukulungisa, ukukhusela iintambo kumanzi nothuli. Zisetyenziswa ngokubanzi kumasimi anje ngeebhodi zokulawula, izixhobo, izibane, izixhobo zoomatshini, oololiwe, iimoto, iiprojekthi njl.
| Izinto: | Umzimba: Isinyithi SUS 304 Isitywina: Polyamide,Ukutywina:irabha elungisiweyo |
| Uluhlu lobushushu: | Min -40℃, Ubukhulu be-100℃, Ixesha elifutshane 120℃ |
| Isidanga soKhuseleko: | ngaphakathi koluhlu lokubamba, idigri yayo yokukhusela inokufikelela kwi-IP68 |
| Iinkcazelo ngeempawu: | Ukuphumelela kuvavanyo lwe-IEC-60077-1999 ukuchasana nokungcangcazela kunye impembelelo, iphumelele i-RoHS |
| Iziqinisekiso: | CE, RoHS |
Inkcazo:
(Nceda uqhagamshelane nathi ngolwazi oluthe kratya ukuba ufuna ezinye iisayizi ezingaqukwanga kolu luhlu lulandelayo.)
| Inombolo yenqaku. | Ubungakanani bomsonto | Uluhlu lokubamba mm | AG mm | GL mm | (H) mm | SW1/SW2Wrench ubukhulu mm | Iiyunithi zepakethi |
| I-HSMS-M12 | M12×1.5 | 3~6.5 | 12 | 6 | 19 | 14/14 | 75 |
| I-HSMS-M16-H | M16×1.5 | 3~6.5 | 16 | 7 | 20 | 14/18 | 75 |
| I-HSMS-M16 | M16×1.5 | 4~8 | 16 | 7 | 21 | 17/18 | 75 |
| I-HSMS-M16-D | M16×1.5 | 5~10 | 16 | 7 | 22.5 | 20/20 | 50 |
| I-HSMS-M18 | M18×1.5 | 5~10 | 18 | 7 | 22.5 | 20/20 | 50 |
| I-HSMS-M20-H | M20×1.5 | 5~10 | 20 | 7 | 22.5 | 20/22 | 32 |
| I-HSMS-M20 | M20×1.5 | 6-12 | 20 | 7 | 23.5 | 22/22 | 32 |
| I-HSMS-M20-D | M20×1.5 | 8~14 | 20 | 7 | 23 | 24/24 | 32 |
| I-HSMS-M22 | M22×1.5 | 8~14 | 22 | 7 | 23 | 24/24 | 32 |
| I-HSMS-M24-H | M24×1.5 | 6-12 | 24 | 7 | 23.5 | 22/28 | 18 |
| I-HSMS-M24 | M24×1.5 | 8~14 | 24 | 7 | 23 | 24/27 | 18 |
| I-HSMS-M25-H | M25×1.5 | 8~14 | 25 | 7 | 23 | 24/28 | 18 |
| I-HSMS-M25 | M25×1.5 | 10–16 | 25 | 7 | 24.5 | 28/28 | 18 |
| I-HSMS-M25-D | M25×1.5 | 13–18 | 25 | 7 | 26 | 30/30 | 18 |
| I-HSMS-M27-H | M27×2.0 | 10–16 | 27 | 8 | 25 | 28/30 | 18 |
| I-HSMS-M27 | M27×2.0 | 13–18 | 27 | 8 | 26 | 30/30 | 18 |
| I-HSMS-M30-H | M30×2.0 | 10–16 | 30 | 8 | 25 | 28/34 | 18 |
| I-HSMS-M30 | M30×2.0 | 13–18 | 30 | 8 | 26 | 30/34 | 18 |
| I-HSMS-M32-H | M32×1.5 | 13–18 | 32 | 8 | 26.5 | 30/36 | 18 |
| I-HSMS-M32 | M32×1.5 | 15–22 | 32 | 8 | 28 | 36/36 | 18 |
| I-HSMS-M32-D | M32×1.5 | 18–25 | 32 | 8 | 33 | 40/38 | 8 |
| I-HSMS-M33 | M33×2.0 | 18-25 | 33 | 8 | 33 | 40/38 | 8 |
| I-HSMS-M36-H | M36×2.0 | 15–22 | 36 | 8 | 28 | 36/40 | 8 |
| I-HSMS-M36 | M36×2.0 | 18–25 | 36 | 8 | 33 | 40/40 | 8 |
| I-HSMS-M40-H | M40×1.5 | 18–25 | 40 | 9 | 33.5 | 40/45 | 8 |
| I-HSMS-M40 | M40×1.5 | 22-30 | 40 | 9 | 35.5 | 45/45 | 8 |
| I-HSMS-M40-D | M40×1.5 | 22–32 | 40 | 9 | 38.5 | 50/50 | 4 |
| I-HSMS-M42 | M42×2.0 | 22–32 | 42 | 9 | 38.5 | 50/50 | 4 |
| I-HSMS-M48 | M48×2.0 | 22–32 | 48 | 9 | 38.5 | 50/52 | 4 |
| I-HSMS-M50 | M50×1.5 | 30–38 | 50 | 9 | 40 | 58/55 | 4 |
| I-HSMS-M56 | M56×2.0 | 30–38 | 56 | 10 | 40 | 58/60 | 4 |
| I-HSMS-M60 | M60×2.0 | 37-44 | 60 | 10 | 41 | 65/65 | 2 |
| I-HSMS-M63 | M63×1.5 | 37-44 | 63 | 10 | 41 | 65/70 | 2 |
| I-HSMS-M63-D | M63×1.5 | 42~53 | 63 | 10 | 44.5 | 75/75 | 2 |
| I-HSMS-M64 | M64×2.0 | 37-44 | 64 | 10 | 41 | 65/70 | 2 |
